Misfit Antique Muzzle Loader Black Powder weapons reclamation with StrongArms Brand Products

These antique vintage pieces were burned in a house fire back in the year 2000. They have been stored in a basement since that time and are totally rusted into junk. StrongArm Brings them back to life.

Visit the web page for all the before and after pictures of this process.

http://strongarmbrand.com/SitePages/USAGES/Gun1/BlackPowder/FireDamageGuns/index.html

Muzzles Loaders before StrongArm Treatment

 

Black Powder Pistol Before StrongArm Treatment

Antique Back Powder Pistol AFTER StrongArm Treatment

Antique Black Powder Pistol AFTER StrongArm Treatment.

 

 

Extreme Motorcycle Makeover at J&P Cycles Day 1 StrongArming The Bikes..

http://www.youtube.com/watch?v=Wbq1cIcoug4

Detail:
Part Number 351-646
Pint Pump Trigger Shoots Stream onto surfaces.
http://www.jpcycles.com/product/351-646

The engine that had the plugs out for years was filled with a gnarly water and rust. Kody blew them out and put StrongArm Brand into the cylinders and had the engine loose and running the following day.
Here’s his comments about it from Facebook..

“The stuff that was in the cylinders was water, that was some gnarly shit. I vacumed it out and sprayed some StrongArm in it, and it broke loose the next morning. It hadn’t run in 20 years..”

“Yep, and we didn’t have any problems getting the bolts out. I also got the motor that was left with no spark plugs in it, unstuck, using StrongArm!”    …Kody Wisner


Extreme Motorcycle Makeover JPcycles Day 2 – StrongArming the Bike.


StrongArm Unstuck Antique Motorcycles done by Bill Cullen

Here’s the testimony of Bill Cullen of the Roosevelt Chapter of the AMCA telling and showing and Indian and Harley that were both stuck and froze up. StrongArm Product made short work of getting them back to running condition.



There are also a lineup of other bikes that Bill has on display there at the Viking Meet. They are shown at the end of the video. ALL these antique motorcycles are preserved with a coating of StrongArm.

Custom Paint and Body Shop StrongArm Brand Conditioning Fluid and Penetrating Oil Testimony

Custom Paint and Body Shop StrongArm Brand Conditioning Fluid and Penetrating Oil Testimony.

Wizard Custom Studios St. Croix Air Brushing
Here’s Bruce and Kelly Bush. See their work and read the web page with their StrongArm testimony letter HERE.

Custom Paint and Body Shop StrongArm Brand Conditioning Fluid and Penetrating Oil Testimony

“My name is Bruce Bush, my wife Kelly and I run WIZARD CUSTOM STUDIOS/St. Croix Air Brushing. We customize cars and Motorcycles, everything from simple pinstripes to full street rod builds. We use StrongArm Brand Products and we Love It !
I have been in the car and motorcycle industry since 1976 and I think every tool box should contain a bottle of StrongArm.

When I first saw this stuff I admit I was skeptical, but I’ve tested it for a year and now I’m amazed! At our shop we have used it as a penetrant for stuck bolts, froze bearings, stuck and unworking tools, (both air and manual) stiff hinges and squeaks. These uses alone have  more than satisfied me but… This stuff StrongArm Brand Product does so much more.!

The most amazing thing I’ve seen it do is convert rust so you can prime or paint over it. Kelly’s 99 Jeep had some rust pits and scabs on the roof. We D.A Sanded with 36 grit and then 80 grit; We then used and orbital wire brush. All the loose rust was gone but it was still all brown down in the bottom of the pits. Now sandblasting could have cleaned out the remaining rust, but the roof would have warped terribly.. Acids can work but are a mess and very caustic. We used StrongArm product as per the directions and primed and painted over it. The Jeep saw hard use last winter and there are no rust spots pits bubbles or any other imperfections coming through the roof !! I’m totally surprised and delighted!

The biggest part of our business is paint. We do fine custom paint and restorations for very particular customers. Our finishes have to look good.! A lot of penetrating oils and preservatives have silicone in them. We can’t have them around our shop because silicon is almost impossible to get off a paint surface and it causes fish eyes (little craters) and wrecks custom paint jobs. StrongArm is made to paint over so it’s the ultimate in body shop safe. I could go on for another three pages, but I’m tellin’ ya try it! You will be amazed too.”

Brush Bush
Wizard Custom Studios
St. Croix Air Brushing
763-238-2400

 

 

Strong Arm Products 16oz Pump Spray Bottle 351-646 via J&P Cycles

This is the page listing from J&P there have been lots of people asking for this page just click the link below..

Strong Arm Sprays Spray16oz Pump Spray Bottle | 351-646 | J&P Cycles

Strong Arm Products 16oz Stream-Drip-Spray Bottle
Part Number 351-646 from J & P Cycles
.

Top choice by builders and preservers across the land.
See the biker section of the StrongArm website for all kinds of case histories and things StrongArm is doing to Rolling Wheels.

 

Customer Submitted Pictures 92 Honda Nighthawk 250CC cleaned and preserved with StrongArm Product Conditioning Fluid and Penetrating Oil

92 Honda Nighthawk 250CC cleaned and preserved with StrongArm Product Conditioning Fluid and Penetrating Oil

Click HERE to see Customer Submitted testimony and before and after pictures of a 92 Honda Nighthawk 250CC cleaned up and preserved with StrongArm Product Preservation Fluid and Penetrating Oil.

See the web page with the before and after pictures of the wheels and chrome on this bike. The guages were in bad shape and the bike was rusting up all over. This information was submitted by the customer and is shown with his notation about it.

 

Antique Corvette CAN AM preserved with StrongArm Brand – ultimate in world class Vette preservation..


Antique Corvette CAN AM preserved with StrongArm Brand
The ultimate in world class Vette preservation..
.

This Antique Custom Corvette is coming up on 40 years old ! The owner keeps it in a little block garage under the house which is on a slope going up. There is NO Temperature control, NO Dehumidifiers, NO Heaters in the winter, and NO Air conditioning in the summer.

IT is just treated on all surfaces with Strongarm in and out. StrongArm has Encapsulated it and now it remains Entombed against the smothering effects of the atmosphere and rust and corrosion it causes. Perpetual preservation is what has resulted.

For this Vette it’s an insurance policy against degradation; which keeps it at it’s highest appraised value.

Brush Detailing Overview for Corrosion and Rust Removal with StrongArm Brand Conditioning Fluid and Penetrating Oil for Preservation of Everything..

Brush Detailing Overview for Corrosion and Rust Removal with StrongArm Brand Conditioning Fluid and Penetrating Oil for Preservation of Everything...

With StrongArm, you don’t be scared to brush stuff..
You are only brushing no harder than on the wrist of your hand..

See the various brushes that people use to clean things. There are lots of bargain brushes that you can get now, and some of them will not last more than a few minutes. Some can just keep on going. There’s a review on the above page.

StrongArm Brand Products are used where they print your money.

100 Dollar Bill

All denominations of money are printed on machinery treated and preserved with StrongArm Brand.

Did You know that StrongArm Fluid is used on the machinery and production equipment, conveyors and facilities of the bureau of engraving and printing of the U.S. Government Where your money is printed?? !

Visit the website page for details and a video of the production process of the $100 Dollar bill.

http://strongarmbrand.com/SitePages/USAGES/BEP/

StrongArm Fluid does not interfere with the inks and intricate production process involved in this new high tech money that is in production which is designed to stop counterfeiting. 80% of the hundred dollar bills that are outside the united states are counterfeit. That’s an inflation that must be stopped.